PEB Shed Price in Pakistan 2025 & 2026 | Industrial Shed Construction Cost Lahore – Mech-Civ
PEB shed price Pakistan 2025 & 2026
If you have tried to find the price of a PEB shed or pre engineered building in Pakistan, you have already discovered the problem: every company’s website says ‘contact us for a quote’ with zero indicative numbers. We are changing that. This guide from Mech-Civ Construction Services (MCCS) — a steel fabrication and PEB construction company operating in Lahore since 1988 — gives you real, current, market-benchmarked pricing for industrial sheds, warehouses, and factory buildings across Lahore, Gujranwala, Islamabad, Rawalpindi, Sheikhupura, and Raiwand.
| All prices below are indicative ranges based on current Pakistan steel market conditions (May 2025 & 2026). Final cost depends on steel procurement price at time of order, site conditions, span, height, cladding specification, foundation complexity, and city. Contact MCCS for a free detailed quotation specific to your project. |

Why PEB Is Now Pakistan’s Dominant Industrial Construction Method
Pre engineered buildings have displaced conventional RCC for industrial construction across Punjab for three reasons that are especially powerful in Pakistan’s economic environment:
• Speed advantage: A PEB shed is ready 40 to 50% faster than equivalent RCC — meaning you start generating revenue from your facility months earlier. In Pakistan’s high-interest-rate environment, time saved is directly money saved.
• Cost advantage: For clear-span industrial spaces above 400 square metres, PEB construction is typically 15 to 30% cheaper per square foot than RCC. The wider the span, the greater the saving.
• No skilled masonry dependency: RCC construction requires large numbers of skilled masons and formwork carpenters. PEB erection uses a smaller, specialised steel crew — eliminating a chronic supply and quality constraint in Pakistani construction.

PEB Shed Price in Pakistan 2025 & 2026 — Structure-by-Structure Breakdown
Category 1: Basic Open or Semi-Open Shed
| Spec Item | Details | Unit | Indicative Range |
| Typical size | 12m × 24m to 15m × 30m | 288–450 sq.m. | — |
| Structure type | Single slope, open or simple cladding | — | — |
| Total project cost | Excluding foundation | PKR | 25 – 45 lakh |
| Per sq. ft rate | Structure + cladding only | PKR/sq.ft | 850 – 1,350 |
| Foundation addition | RCC isolated footings | PKR/sq.ft | 100 – 380 |
| Complete cost with foundation | — | PKR/sq.ft | 1,120 – 1,730 |
Category 2: Standard Closed Industrial Shed
| Spec Item | Details | Unit | Indicative Range |
| Typical size | 18m × 36m to 20m × 50m | 648–1,000 sq.m. | — |
| Structure type | Double slope, full wall cladding, roller shutter, ventilators | — | — |
| Total project cost | Excluding foundation | PKR | 55 – 95 lakh |
| Per sq. ft rate | Structure + cladding | PKR/sq.ft | 850 – 1,400 |
| Foundation addition | RCC pad footings | PKR/sq.ft | 270 – 400 |
| Concrete flooring (150mm) | Reinforced | PKR/sq.ft | 180 – 280 |
Category 3: Medium Column-Free Warehouse
| Spec Item | Details | Unit | Indicative Range |
| Typical size | 24m × 60m to 30m × 80m | 1,440–2,400 sq.m. | — |
| Structure type | Clear-span, full insulated or colour-coated cladding | — | — |
| Total project cost | Excluding foundation + flooring | PKR | 1.5 – 2.8 crore |
| Per sq. ft rate | Structure + cladding | PKR/sq.ft | 1,050 – 1,600 |
| Insulated (PUF sandwich panel) upgrade | — | PKR | +25 to 40% on cladding cost |
| Fire exit, dock doors, gutters | Allowance | PKR | 8 – 20 lakh additional |
Category 4: Crane-Bay Factory / Heavy Industrial
| Spec Item | Details | Unit | Indicative Range |
| Typical size | 25m × 60m to 40m × 120m | 1,500–4,800 sq.m. | — |
| Structure type | Crane-compatible, heavy primary frames, high eave | — | — |
| 5T EOT crane provision | Runway beams + end carriages | PKR | 25 – 45 lakh additional |
| 20T EOT crane provision | Heavy runway, gantry system | PKR | 1.5 – 2.5 crore additional |
| Total project cost | Structure + crane + standard cladding | PKR | 3.5 – 7+ crore |
| Per sq. ft rate | Structure + cladding only (no crane) | PKR/sq.ft | 1,300 – 2,200 |

The 8 Hidden Costs That Blow PEB Budgets in Pakistan
This is the section most PEB company websites will never write — because these are the line items that get quietly omitted from initial quotes to make the bid look cheaper at shortlist stage. MCCS includes all of these in our BOQs. Other contractors may not.
• Site clearance and levelling: PKR 3 to 15 lakh depending on existing site condition and debris removal
• Foundation engineering and construction: Often 15 to 20% of total project cost — yet some PEB quotes mention it as a single vague line item or exclude it entirely
• Anchor bolts and base plate grouting: Appears small (PKR 1–3 lakh) but is structurally critical and often billed as an extra
• Internal concrete flooring: PKR 180 to 350 per sq.ft depending on thickness and reinforcement — a 1,000 sq.m. warehouse floor adds PKR 20 to 35 lakh to your budget
• Gutters, downpipes, and site drainage: Often not in the base PEB quote; can add PKR 4 to 10 lakh
• LDA / CDA / municipal approval and NOC fees: PKR 1.5 to 8 lakh depending on city and plot area
• Electrical conduit provisions in purlins: If you want pre-run conduit for your industrial electrical installation, specify this at design stage — retrofitting costs 3x more
• Paint system: Basic primer is included; two-coat epoxy or polyurethane finish for corrosive environments (near chemical plants, coastal areas) adds 8 to 15%
Cost Comparison: PEB vs RCC for Industrial Construction in Pakistan
| Factor | PEB (MCCS) | RCC Conventional | Winner |
| Cost per sq.ft (large span) | PKR 850–1,600 | PKR 1,400–2,200 | PEB by 15–30% |
| Construction timeline | 8–13 weeks | 20–40 weeks | PEB by 40–50% |
| Clear span (column-free) | Up to 60m+ | Typically 10–15m max practical | PEB — no contest |
| Expandability | Yes — add bays easily | Major structural surgery | PEB — much easier |
| Earthquake resistance | Ductile steel (designed to ASCE 7) | Requires special detailing | PEB — inherently ductile |
| Maintenance | Repaint every 10–15 years | Concrete spalling, rebars rust | PEB advantage |
| Design life | 40–50+ years | 50+ years | Comparable |

City-by-City PEB Pricing: What Changes in Each Location
Lahore
Lahore offers the deepest supply chain for structural steel in Pakistan. Best pricing on materials, shortest fabrication lead times. Civil work slightly more expensive due to LDA approval requirements and clay sub-soil (requires wider footings). Net result: Lahore is the most competitive city for total project cost.
Gujranwala
Proximity to Lahore’s supply chain keeps material costs near-identical. Local erection labour is available and skilled. Slightly higher civil costs in areas with high groundwater table. MCCS quotes Gujranwala projects at Lahore-equivalent rates with no mobilisation premium.
Islamabad & Rawalpindi
CDA zoning restrictions and Seismic Zone 2B requirements (which add approximately 5 to 10% to structural steel weight) make Islamabad and Rawalpindi 8 to 15% more expensive than equivalent Lahore projects. Approval timelines are also 2 to 4 weeks longer. MCCS has established site teams in Rawalpindi to minimise mobilisation costs.
Sheikhupura & Raiwand
Both cities sit within Lahore’s supply radius. Costs are effectively identical to Lahore. These zones are seeing the fastest expansion of industrial plots in Pakistan in 2025 & 2026 — meaning demand (and therefore lead times for competitor companies) is high. MCCS’s 4 to 6-week fabrication cycle is most advantageous here.

How to Get an Accurate PEB Quote That Won’t Change After Contract Signing
The single most important thing you can do to protect your budget is to insist on a line-item BOQ before signing any contract. Provide the following information when requesting quotes from any PEB company including MCCS:
• Plot dimensions (length and width) and GPS location or street address
• Required clear-span width and building length
• Eave height (the height from floor to the underside of the roof at the column)
• Crane requirements: capacity in tonnes, span, and travel distance if applicable
• Cladding preference: plain GI, colour-coated, or insulated sandwich panel (PUF or rockwool)
• Required accessories: skylights, turbo ventilators, ridge vents, mezzanine floors, fire doors
• Foundation requirement: will you be doing foundations separately, or do you need a turnkey price?
• Approval status: has the plot been approved for industrial construction by LDA/CDA?
• Timeline: when do you need the structure ready?
Armed with this specification, you can compare quotes from multiple PEB companies on a truly like-for-like basis.
Get a Real Quote — Not a Vague Estimate — from MCCS
Mech-Civ Construction Services has been delivering industrial steel and PEB projects in Pakistan since 1988. We believe the construction industry owes its clients honest, upfront pricing — which is why we publish these benchmarks when every competitor hides behind a contact form.
Contact MCCS today. Our team will assess your site, review your requirements, and deliver a detailed line-item BOQ — including foundations and civil works — within 5 to 7 working days.
📞 Call / WhatsApp: +92-321-8771689
🌐 Website: mechcivconstruction.com
📍 Serving: Lahore · Islamabad · Rawalpindi · Gujranwala · Sheikhupura · Raiwand
