Mech-Civ Construction Services (MCCS) is a pre engineered steel building manufacturers in Pakistan, operating since 1988. We design in SAP2000 and Tekla, fabricate primary and secondary steel in our own Lahore plant, and erect warehouses, factories, cold stores and sheds across Pakistan under a single contract with an itemised Bill of Quantities (BOQ).
Get a free BOQ in 24 hours: WhatsApp 0321-8771689 · Call · Email

PEB manufacturer at a glance
| Particulars | Details |
|---|---|
| Established | 1988 |
| Projects delivered | 500+ |
| Fabrication | In-house plant: CNC cutting, drilling, shot blasting, epoxy primer |
| Clear span | Up to 90 m, no internal columns |
| Eave height | 4 m to 20 m+ |
| Steel grades | ASTM A36 / A572, IS 2062, BS EN 10025, with mill test certificates |
| Design software | SAP2000, Tekla Structures, STAAD, AutoCAD |
| Typical delivery | 4–10 weeks from approved drawings and ready foundation |
| Coverage | Fabricated in Lahore, erected nationwide |
PEB manufacturer, contractor or supplier: what is the difference?
These three terms are used interchangeably in Pakistan, but they carry different risk for you as the buyer.
| Manufacturer | Contractor | Supplier | |
|---|---|---|---|
| Owns the fabrication plant | Yes | Often no | Often no |
| Designs the frames | Yes | Sometimes | Rarely |
| Controls steel tolerances and lead time | Yes | Depends on the vendor | No |
| Erects on site | Varies | Yes | Usually no |
| Who answers if a member does not fit? | One company | Contractor and vendor argue | Supplier points to site |
MCCS is all three under one contract: we manufacture the steel, erect it and, if you want, build the foundations and floor. If a connection does not fit, there is one team to fix it.
Pre engineered building solutions we manufacture
- Warehouses and logistics centres: single and multi-bay, dock provisions, skylights, mezzanines.
- Factories and industrial sheds: textile, pharma, food processing, engineering, auto workshops.
- Cold storage: sandwich-panel buildings with cold-chain detailing.
- Agricultural, dairy and poultry buildings: ventilated, expandable spans.
- Commercial steel buildings: showrooms, exhibition halls, retail sheds.
- Canopies, parking sheds and mezzanine floors.
- Crane-ready buildings: frames designed for overhead crane loads (state capacity in your enquiry).
Looking for local pricing and zones? See our pre-engineered buildings in Lahore page.

How we manufacture a PEB, step by step
- Brief and site data. Plot size, use, span, height, crane and collateral loads, wind and seismic zone.
- Engineering. Frames designed in SAP2000, STAAD and Tekla. You receive stamped drawings, load calculations, BOQ and an erection manual.
- Fabrication. Tapered primary members and secondary members (purlins, girts) are CNC cut, drilled, shot blasted and epoxy primed in our plant.
- Quality check. Dimensional inspection against shop drawings and steel mill certificates for the material used. You are welcome to inspect before dispatch.
- Dispatch and erection. Bolted connections on site, so no field welding on primary frames.
- Cladding, accessories, handover. Roof and wall sheeting, gutters, ventilators, skylights, as-built drawings and a written structural warranty.
What is included in a PEB steel building
| System | Components |
|---|---|
| Primary framing | Tapered columns, rafters, base plates, anchor bolts |
| Secondary framing | Purlins, girts, eave struts, bracing |
| Envelope | Single-skin or insulated sandwich panels, standing seam, translucent strips |
| Accessories | Ridge vents, gutters, downspouts, louvres, doors, skylights, PEB accessories |
| Add-ons | Mezzanine floors, crane beams, canopies |
Engineering standards and design basis
Our designs follow AISC for steel design, MBMA practice for metal building systems, ASCE 7 for loads, and the seismic provisions applicable in Pakistan. Wind design covers up to 160 km/h. Welding follows AWS. Your stamped drawings state the design basis (wind speed, seismic zone, live and collateral loads) so any consultant can verify it. For PEB structural design only, see PEB design services in Pakistan.
What drives the cost of a pre engineered steel building
Price per square foot is a rough guide. The real drivers are:
- Steel weight (kg per m²): set by span, bay spacing, eave height and design loads.
- Crane and collateral loads: crane capacity, solar panels, HVAC, sprinklers.
- Envelope: panel thickness, coating, insulation type, number of skylights.
- Foundation and civil works: soil conditions, floor slab specification.
- Location and logistics: distance, access, erection crew travel.
- Accessories and mezzanine area.
For current indicative ranges (basic shed, standard warehouse, cold storage), see the PEB price table for Lahore. We confirm a firm price only after a BOQ.

How to compare PEB quotations fairly
Ask every manufacturer for the same six lines: total steel tonnage and kg/m², steel grade with mill certificates, coating or paint system, panel thickness and insulation, design loads used (wind, seismic, collateral, crane), and what is excluded (foundation, anchor bolts, transport, erection, cranes). A quote that looks cheaper is often lighter steel or thinner panels.
How to choose a pre engineered building manufacturer in Pakistan
- Do they own the plant? Ask for the plant address and visit it.
- Can you see steel mill certificates for a past project?
- Are drawings stamped by a PEC-registered engineer?
- Is the quote an itemised BOQ with tonnage?
- Are design loads stated, not assumed?
- Can you call two clients from similar projects?
- Who erects: their own crew or a subcontractor?
- Is the warranty written and what does it cover?
- How long have they operated at the same address and number?
- Do project photos show real sites, with locations and dates?
We are happy to be measured against all ten.
Industries we serve
Manufacturing and textile, warehousing and logistics, agriculture and dairy, poultry and livestock, cold chain and food, petroleum and fuel storage, auto workshops, healthcare, education, telecom and government projects.
Where we deliver
We fabricate in Lahore and erect across Pakistan, including Punjab, Karachi, Islamabad and Rawalpindi, Peshawar, Quetta and Multan. Projects near Lahore: PEB in Lahore. Also see industrial construction in Lahore and steel storage tanks.
Project snapshots
Add 3 to 4 real projects here, each with: location, building type, size (sq ft), clear span, eave height, steel tonnage, delivery time, one photo with descriptive alt text. Real numbers are what AI answer engines and buyers quote.
Frequently asked questions
What is a pre engineered steel building? A pre engineered steel building (PEB) is a steel structure whose frames, secondary members and cladding are engineered, fabricated in a factory and bolted together on site. Tapered members are sized to the loads, which typically uses less steel and shortens construction compared with conventional steel or RCC.
Who are the best pre engineered steel building manufacturers in Pakistan? Judge manufacturers on evidence: years operating, an owned fabrication plant, stamped drawings, itemised BOQs, mill certificates and reachable client references. Mech-Civ has operated in Lahore since 1988, has delivered 500+ projects and welcomes plant visits.
What is the difference between a PEB manufacturer, contractor and supplier? A manufacturer designs and fabricates the steel in its own plant. A contractor builds or erects on site, often with steel bought elsewhere. A supplier sells components with little design or erection responsibility. MCCS provides all three under one contract.
Are pre engineered metal buildings and pre engineered steel buildings the same? Yes. “Metal building” is the common international term and “steel building” or “steel shed” is common in Pakistan. Both mean a PEB system with steel primary frames, secondary members and metal cladding.
How much does a pre engineered building cost in Pakistan? Indicatively, a basic shed is about PKR 700–1,200 per sq ft, a standard warehouse PKR 1,200–1,800 and insulated or cold storage PKR 1,800–2,500+, excluding foundation and MEP (Oct 2026). Steel weight, span, loads and cladding decide the final figure. Send dimensions for an itemised BOQ.
How long does PEB construction take? Typically 4–10 weeks from approved drawings and a ready foundation. Fabrication runs in parallel with site preparation, so you avoid concrete curing delays.
What standards do your PEB designs follow? AISC for steel design, MBMA for metal building systems, ASCE 7 for loads, AWS for welding, and ASTM, IS or BS EN steel grades. Drawings state the design basis.
What is the maximum span and height? Clear spans up to 90 m without internal columns and eave heights from 4 m to 20 m or more, subject to design loads.
Do you deliver outside Punjab? Yes. We fabricate in Lahore and erect nationwide, including Karachi, Islamabad, Rawalpindi, Peshawar and Quetta.
What do I need to send for a quote? Length, width, eave height, intended use, location, any crane or mezzanine requirement, and soil report if available. We reply with a BOQ, timeline and site survey booking within 24 hours.
Request your PEB quotation
Send length × width × height, use and location. You receive an itemised BOQ, timeline and a free site survey booking.
WhatsApp us · Call 0321-877-1689 · Email
Mech-Civ Construction Services, Lahore, Punjab, Pakistan.
MECH-CIV (Peb, Pre-Engineered Buildings, Peb Manufacturing)
Address: Suit# 114, 1st Floor Divine 2 Plaza Main Airport Road Lahore, Cantt.
Phone: 0321 8771689
| Saturday | Open 24 hours |
| Sunday | Open 24 hours |
| Monday | Open 24 hours |
| Tuesday | Open 24 hours |
| Wednesday | Open 24 hours |
| Thursday | Open 24 hours |
| Friday | Open 24 hours |
