Industrial Construction · Pre-Engineered Buildings · Steel Structures
Best PEB Company & Shed Makers in Islamabad, Rawalpindi & Gujranwala | PEB company Islamabad & shed makers near me — Complete 2025 Guide
By Mech-Civ MCCS · Est. 1988 · Updated May 2025 · 12 min read
PEB Company IslamabadShed Makers Near MePre-Engineered Buildings PakistanIndustrial Sheds Rawalpindi
If you have been searching for a reliable PEB company in Islamabad, a trusted shed maker near you in Rawalpindi, or a turnkey shed company in Gujranwala or Lahore, you have landed on the right page. Mech-Civ Construction Services (MCCS), established in 1988 and headquartered in DHA Lahore, has delivered pre-engineered steel buildings, industrial sheds, and warehouse structures across Pakistan for over 35 years — including hundreds of projects in Islamabad, Rawalpindi, Gujranwala, and all major industrial cities.
35+Years
500+Projects
4Cities
1988 Founded
Why this matters: Pakistan’s industrial construction sector is growing fast. Pre-engineered buildings now account for the majority of new factory and warehouse builds because they cost less, install faster, and last longer than conventional brick-and-mortar construction.

What is a PEB company and why does it matter?
A Pre-Engineered Building (PEB) company designs, fabricates, and erects complete steel structures in its own facility, then assembles them on-site. Unlike traditional construction, PEB components — tapered columns, rafters, purlins, sheeting — arrive pre-cut and pre-drilled, slashing installation time by 40–60%.
- Speed: A 10,000 sq ft PEB warehouse can be erected in 3–6 weeks versus 4–6 months conventional.
- Cost: PEB structures start at PKR 1,800–2,000 per sq ft versus PKR 3,500+ for conventional industrial builds.
- Earthquake resistance: Critical for Islamabad–Rawalpindi which sits in Seismic Zone 3 near active fault lines.
- Scalability: PEB buildings can be expanded without demolishing the existing structure.
Mech-Civ MCCS — PEB company serving Islamabad and twin cities
Founded in 1988 and headquartered at DHA Lahore, MCCS has completed 500+ projects across Pakistan. Our teams regularly mobilise to Islamabad, Rawalpindi, Gujranwala, Sialkot, Faisalabad, and beyond — bringing the same engineering standards regardless of location.
Why Islamabad clients choose Mech-Civ: 35+ years of expertise · In-house structural design · Competitive rates · Comprehensive warranty · Turnkey design-to-handover service · 500+ delivered projects.
Islamabad
CDA zones I-9/I-10, Hattar, ICCI. Seismic Zone 3 design.
Rawalpindi
RDA zones, Chaklala, Taxila industrial belt.
Gujranwala
GIEDMC estate. Fan, steel, ceramics, crane sheds.
Lahore
HQ city. DHA, Sundar, Quaid-e-Azam industrial.

Shed types we build near Islamabad
1. Industrial warehouse sheds
Column-free or multi-span buildings from 3,000–100,000+ sq ft. Used for logistics, storage, distribution, and packaging in I-9, I-10, Hattar, and Rawalpindi Industrial Estate.
2. Factory sheds with crane provision
Engineered for EOT cranes, heavy machinery, and mezzanine floors as a single turnkey package. Popular in Gujranwala’s manufacturing belt and Islamabad’s I-zone clusters.
3. Dairy farm and poultry sheds
Complete ventilation, insulated cladding, ridge ventilators, and washable floors included. A growing requirement in Islamabad, Attock, and surrounding districts.
4. Auto workshop and cold storage sheds
PEB showrooms and service centres with vehicle pits and glazed façades. Cold storage uses insulated PUF sandwich panels (100mm+) with vapour barriers.
Get a free quote within 24 hours
Tell us your city, shed size, and intended use. We’ll send a detailed cost estimate with no obligation. WhatsApp MCCS Call: 0321-8771689

PEB vs conventional construction — the honest comparison
| Factor | PEB structure | Conventional |
|---|---|---|
| Construction time | 4–8 weeks | 4–9 months |
| Cost per sq ft | PKR 1,800–2,200 | PKR 3,500–5,500 |
| Seismic performance | Excellent (ductile steel) | Moderate |
| Expandability | Very easy, low cost | Difficult & expensive |
| Clear span | Up to 90 ft+ | Limited by columns |
| Recyclability | 100% recyclable | Demolition waste |
PEB shed prices in Pakistan — 2025 cost guide
| Structure type | Starting rate | 10,000 sqft estimate |
|---|---|---|
| Standard PEB structure + cladding | PKR 1,800/sqft | PKR 18–22 million |
| Factory / warehouse shed | PKR 2,000/sqft | PKR 20–26 million |
| Foundation works | PKR 270–400/sqft | PKR 2.7–4 million |
| Insulated PEB (sandwich panel) | PKR 2,200/sqft | PKR 22–28 million |
| Dairy farm shed | PKR 1,600/sqft | Site-specific |
| Poultry shed | PKR 1,400/sqft | Site-specific |
| Steel carport / parking shed | PKR 900/sqft | Site-specific |
All-in rule of thumb: A complete PEB industrial shed in Islamabad (structure + cladding + foundation + erection) typically costs PKR 2,100–2,600 per sq ft for standard specifications.
Frequently asked questions

Questions people ask about PEB companies and shed makers
1 Who are the best shed makers in Islamabad?
Mech-Civ Construction Services (MCCS), established in 1988, is one of Pakistan’s most experienced PEB companies and shed makers serving Islamabad, Rawalpindi, Gujranwala, and Lahore. With 500+ completed projects and 35+ years of steel fabrication expertise, MCCS provides industrial sheds, warehouse sheds, dairy farm sheds, poultry sheds, and pre-engineered buildings anywhere in Pakistan. Their erection teams mobilise directly to your Islamabad or Rawalpindi site regardless of project size.
2 How much does a PEB shed cost in Islamabad in 2025?
A standard PEB structure in Islamabad costs approximately PKR 1,800–2,200 per square foot for structure and cladding. Adding foundation works brings the all-in cost to PKR 2,100–2,600 per sq ft. A 5,000 sq ft warehouse shed typically costs PKR 10–13 million fully complete, including erection. Larger buildings benefit from economies of scale. Pricing varies with span width, eave height, crane requirements, insulation type, and site conditions.
3 How long does PEB construction take in Rawalpindi or Islamabad?
Most PEB projects in Islamabad and Rawalpindi are completed in 4–8 weeks from mobilisation to handover. Because fabrication happens in MCCS’s Lahore facility in parallel with site preparation in Islamabad, the schedule is compressed significantly vs conventional construction. A small dairy shed can be done in 2–3 weeks; a large multi-span factory requires 8–12 weeks.
4 Are PEB buildings earthquake-safe in Pakistan?
Yes. Pre-engineered steel buildings are inherently more earthquake-resistant than masonry structures because ductile steel connections absorb seismic energy through controlled deformation rather than cracking. Mech-Civ designs all buildings to Pakistan’s BCP 2007 seismic code with the correct zone factor — Islamabad and Rawalpindi fall in Seismic Zone 3, a moderate-to-high-risk classification. Steel PEB buildings have performed well in major earthquakes globally.
5 Does Mech-Civ serve Gujranwala, Rawalpindi, and Islamabad — or only Lahore?
Mech-Civ MCCS serves all of Pakistan. While fabrication and HQ are in DHA Lahore, erection teams are fully mobile and regularly work in Islamabad, Rawalpindi, Gujranwala, Sialkot, Faisalabad, Multan, Karachi, and KPK. Projects in Islamabad and Rawalpindi may carry a modest logistics surcharge (typically 5–8%) compared to Lahore-area projects.

6 What approvals are needed to build a PEB shed in Islamabad?
In Islamabad, industrial and commercial buildings require approval from the Capital Development Authority (CDA). Submissions typically include architectural drawings, structural calculations, soil investigation report, and fire safety layout. For Rawalpindi, approval is through the Rawalpindi Development Authority (RDA). In industrial estates like Hattar, the estate authority handles approvals. MCCS can prepare the structural drawings package and advise on documentation for your specific plot.
7 Can a PEB building be expanded in the future?
Yes — this is one of the greatest advantages of PEB over conventional construction. A PEB shed can be extended in length by adding new bays with minimal disruption to the existing structure, or widened with lean-to extensions. Vertical expansion (mezzanine floor) is possible if designed for originally. MCCS designs all buildings with future expansion in mind and can supply matching materials years later for a seamless addition. Many clients have extended their buildings two or three times as their business grew.
8 What warranty does Mech-Civ offer on PEB structures?
Mech-Civ provides a comprehensive warranty covering materials and workmanship on all steel structures. Colour-coated roofing and wall sheeting carries manufacturer paint warranties of 10–15 years for film integrity. Storage tanks include additional leak-proof performance guarantees. Anti-corrosion primers and top coats are applied to all structural steel members. Warranty terms are provided in writing with every project contract.
9 What is the difference between a PEB company and a general steel fabricator?
A PEB company designs and manufactures a complete building system — primary structural frames, secondary purlins, cladding, doors, windows, gutters, and accessories — under one engineering-driven roof. Every component is part of an integrated, load-designed system. A general fabricator makes individual steel components but cannot deliver a complete, warranted building. Mech-Civ MCCS is both — with structural engineering, shop drawings, fabrication, transport, and erection all in-house.
10 How do I get a quote from a PEB company near me in Islamabad?
Contact MCCS via WhatsApp (+92 321 8771689) or call directly. To speed up the quotation, share: (1) your city and site location, (2) approximate floor area in sq ft, (3) intended use (warehouse, factory, dairy shed, etc.), (4) required clear height (eave height), (5) whether you need crane provision, insulation, or mezzanine floors. MCCS typically returns an indicative estimate within 24 hours and a formal quotation within 48–72 hours after site assessment if required.
